These tools are designed for disconnecting cable connectors. Based on the cable connectors and microinverter you are using, will determine which style below you will need. 

M Series + S Series

This style is used for the Enphase M series and S series microinverters utilizing the Engage cable system, MC4, and H4 solar panel connectors.

The M & S series microinverters are not commonly used these days as Enphase has moved on to the Q series inverters. However, there are thousands of solar systems installed using these inverters which need replacement from time to time. If you find yourself working on a system like this, having this tool will come in quite handy. 

To help make this tool more functional on a daily basis, there are also tabs for disconnecting both MC4 (multi-contact) and H4 (amphenol) solar connectors which are the two most common connections used on solar panels. 

To use the tool you simply insert the two prongs, for whichever disconnection means you are needing, into the holes found on the Engage cable or solar connector. Once pushed into place, rock the connector back and forth and pull gently to disengage. 

IQ + MC4 Series

This tool is designed for the disconnection of IQ Cable connectors, DC connectors and AC module mounts.

It is compatible with Enphase IQ microinventers and IQ cables. 

It can additionally be used to disconnect Enphase MC4 connections. 

Enphase recommends that you will typically need one of these tools per each installation. 

Please Note: These tools are used strictly for the removal process only.